Drain cleaning in Clive, IA
Clogged or backed-up drain? Licensed local pros clear it fast — snaking, hydro jetting, and main-line sewer clearing, with same-day help near you.
No-obligation estimate Licensed & insured · Same-day
Pricing reviewed June 2026 · Local data from U.S. Census ACS
What's clogged?
- Licensed& fully insured
- Same-dayservice available
- Upfrontpricing, no pressure
- Localpros, nationwide
Clive drain cleaning methods
Drain snaking / rooter
A motorized cable breaks through and pulls out the clog. Fast and economical for a single slow or stopped fixture — sink, tub, shower, or toilet.
Hydro jetting
High-pressure water scours the full pipe wall, clearing grease, scale, and roots. The durable fix for recurring or main-line clogs.
Sewer camera inspection
A waterproof camera locates the blockage and shows whether it’s grease, roots, or a broken pipe — so you only pay for the work you need.
Main line & sewer clearing
Whole-house backup cleared through the cleanout. Treated as an emergency, with same-day and 24/7 availability from local pros.
Homes & drains in Clive
U.S. Census ACS- Households
- 7,430
- Homeowners
- 5,193
- 71% own
- Median home value
- $359,300
- Median income
- $124,908
- Median home built
- 1995
- Housing units
- 7,327
With a median home built in 1995, many Clive homes have older sewer laterals and cast-iron or clay drain lines — a common reason roots, scale, and recurring clogs show up here.
Drain cleaning cost in Clive.
In Clive, Iowa, drain cleaning costs typically range from $95 to $250 for a single drain snake, $125–$325 for a toilet or kitchen-line clog, and $150–$475+ for a main sewer line clog. Hydro jetting runs $325–$750 for a branch line and $550–$1,400+ for the main sewer. Camera inspections cost $95–$375. Prices vary based on clog severity, access, and pipe material. With a median home built in 1995 (about 31 years old), newer homes often have PVC/ABS pipes prone to grease and hair clogs, while older pre-1970 homes may have clay or cast-iron laterals susceptible to tree-root intrusion and freeze-thaw damage. Labor rates reflect licensed plumber requirements under the Iowa Plumbing and Mechanical Systems Board.
| Type / job | Typical Clive cost |
|---|---|
| Snake a single drain (sink, tub, shower)Cable/auger, one fixture | $95 – $250 |
| Toilet or kitchen-line clogMost common call | $125 – $325 |
| Main line / sewer clog (via cleanout)Whole-house backup | $150 – $475+ |
| Hydro jetting — branch lineScours grease & scale | $325 – $750 |
| Hydro jetting — main sewer lineRoots & heavy buildup | $550 – $1,400+ |
| Sewer camera inspectionLocate & diagnose the blockage | $95 – $375 |
| Sewer line repair (spot fix)If the camera finds a break | $950 – $3,700+ |
Prices include labor and shift with the clog's location and severity. Main-line and hydro-jetting jobs run higher; a single fixture snaked runs at the low end.
Ready to get your drain cleared in Clive?
Speak with a licensed, insured drain technician near you. Upfront pricing, same-day availability, no obligation.
- Licensed & insured
- Same-day availability
- Upfront, no-pressure pricing
- Local pros near you
No obligation — talk through your options.
What Drives Drain Cleaning Costs in Clive?
The price of drain cleaning in Clive depends on the clog location (sink vs. main line), the method needed (snaking vs. hydro jetting), and accessibility (cleanout availability, buried lines). Older homes with clay or cast-iron pipes often require root cutting or jetting, which costs more. A camera inspection after clearing adds $95–$375 but helps diagnose recurring issues. Permit fees apply only if pipe repair or replacement is needed, not for routine cleaning.
Common Drain Issues in Clive
- Tree-root intrusion in old laterals
Homes built before 1970 often have clay or cast-iron sewer laterals that crack or separate at joints, allowing roots to enter and cause blockages. Iowa's freeze-thaw cycles worsen this.
- Grease and hair clogs in kitchen/bath lines
Newer homes with PVC pipes commonly experience slow drains from grease buildup in kitchen sinks and hair in bathroom drains, requiring snaking or jetting.
- Recurring main-line backups from pipe corrosion
Aging cast-iron pipes in older Clive homes can corrode internally, creating rough surfaces that trap debris and lead to repeated clogs, often needing replacement.
What’s different about Clive.
Generic cost pages skip the things that actually decide your price and which method fits here — local pipe materials, sewer-lateral rules, and the tree-root pressure in the ground.
Recommended approach for Clive
Many Iowa homes built before 1970 have jointed clay or cast-iron sewer laterals that tree roots invade through cracks and loose joints, while seasonal freeze-thaw ground movement further shifts and separates pipe. Recurring slow drains, gurgling, and backups usually point to roots rather than a one-off blockage. Mechanical snaking or hydro jetting clears the line, and a follow-up camera inspection confirms whether the pipe is intact or needs lining or replacement. In neighborhoods prone to sewer surcharge or basement backups, a backwater valve can help prevent reverse flow.
Sources: Iowa Plumbing & Mechanical Systems Board (DIAL) · Iowa Administrative Code Chapter 25 - State Plumbing Code (641 IAC 25) · Iowa Code Chapter 105 - Plumbers, Mechanical Professionals, and Contractors
What Clive code requires
Clearing a clogged drain in Clive needs no permit, but repairing or replacing a sewer line does. Iowa drain and sewer work follows the state plumbing code — here’s what applies:
- PermitRepair/replace only
Routine clearing of an existing drain by snaking or jetting does not require a plumbing permit. Repairing or replacing buried building drain or sewer pipe is regulated plumbing work that requires a permit from the local authority having jurisdiction.
- Cleanout accessRequired
Iowa adopts the Uniform Plumbing Code (641 IAC Chapter 25), which requires accessible cleanouts at the junction of the building drain and building sewer, at changes of direction, and at intervals along the run (generally not exceeding 100 feet).
- Licensed contractorState-licensed plumber
Yes. Plumbing and drainage/sewer work within the property must be performed by a licensed plumber; licensing is administered by the Iowa Plumbing and Mechanical Systems Board (PMSB) under the Department of Inspections, Appeals, and Licensing (DIAL).
- Lateral ownershipHomeowner to the main
In most Iowa cities the homeowner owns and maintains the entire sewer lateral from the house to the connection at the public main, even where it runs under public right-of-way.
- Backwater valveCheck local code
Under Iowa's adoption of the Uniform Plumbing Code (641 IAC 25.4, UPC Section 710.1), a backwater valve is required only where the local administrative authority determines it necessary based on local conditions; when required it must be a manually operated gate or fullway ball valve, with an automatic backwater valve permitted but not mandated.
Sources: Iowa Plumbing & Mechanical Systems Board (DIAL) · Iowa Administrative Code Chapter 25 - State Plumbing Code (641 IAC 25) · Iowa Code Chapter 105 - Plumbers, Mechanical Professionals, and Contractors
Not sure what your Clive drain needs?
A licensed Clive pro will walk you through the likely cause, the right method, and what it costs — in one quick call.
No obligation — talk through your options.
Local programs in Clive
Drain cleaning itself carries no rebate, but in Clive it’s worth knowing who owns the line and what protection options exist:
- UtilityHomeowner to the mainSewer lateral responsibility →
In most Iowa cities the homeowner owns and maintains the entire sewer lateral from the house to the connection at the public main, even where it runs under public right-of-way.
- UtilityVaries — check your utilityOptional sewer line protection plan →
Some Iowa utilities and municipalities offer optional service-line protection plans that can offset lateral repair costs — for example: Des Moines Water Works offers an optional service line protection plan administered by HomeServe for single-family customers; the endorsed plan covers the exterior water service line (locating, excavating, and repair/replacement), and HomeServe separately markets exterior sewer/septic line coverage that the utility does not bill or endorse. Availability is set by your local provider, so check whether Clive’s own water or sewer utility offers a similar plan, and review what’s covered before enrolling.
A clog is usually a clearing job; a cracked, root-filled, or collapsed lateral is a repair you own. A camera inspection tells you which one you’re dealing with before you spend on a dig.
Drain cleared in three steps.
- 1
Tell us what’s clogged
Use the cost tool or call — takes 30 seconds. A slow sink, a backed-up toilet, or sewage coming up.
- 2
Get matched with a local pro
We connect you with a licensed, insured drain technician near you — often the same day.
- 3
Drain cleared, fast
Your pro confirms the price on-site and clears the line. Most clogs are cleared in a single visit.
Drain cleaning FAQs — Clive
No, routine snaking or jetting to clear a clog does not require a permit. However, repairing or replacing buried sewer pipe is regulated plumbing work that requires a permit from the local authority.
Need a drain cleared in Clive?
Talk to a licensed local pro now — no obligation, no pressure.